Enjoy complimentary standard shipping on all domestic orders.
Ultimate Air Assist Nozzles, Listed by Brand
FoxAlien
These nozzles are designed specifically for the FoxAlien line of laser modules
FoxAlien 20W/40W
45
This nozzle is 25mm long and slips onto the 18.00mm lens housing.
FoxAlien 5W FF
50
This nozzle is 25mm long and comes with an adapter ring to fit onto the 15.00mm lens housing.
FoxAlien 5W/15W Adjustable
50
The original 5W and 15W laser modules had removable lenses. This nozzle comes with an 18.00mm diameter lock ring with M9x0.5mm threaded hole on the inside. Will also work with most other diode laser modules which use standard M9x0.5mm lens barrels.
Ortur
We make nozzles for nearly all of Ortur's laser modules.
LM2
50
This nozzle comes with an adapter for the 12.00mm lens housing of the LU1-4.
LM2 Pro
50
This nozzle comes with an adapter for the 13.00mm lens housing of the LU2-4.
LM2 Pro SF
55
This nozzle includes a brass clamping ring to squeeze onto the very short lens housing of the LU2-4 SF module. You can still retain the use of the laser shield if you cut the cone portion off the shield.
Atomstack
Atomstack has many different laser module models, and within each particular model there are several different variants of the lens housing size and style. Please read the descriptions carefully and you will absolutely need to measure your actual lens housing in order to know what you have and which option to choose. If in doubt, please contact us with pictures and measurements!
A5 Pro M9x0.5mm
50
This nozzle comes with an adapter to screw onto the M9x0.5mm lens barrel of the A5 Pro module.
A5 Pro 12mm
50
This nozzle comes with an adapter slide onto the 12.00mm lens barrel of the A5 Pro module.
M50 14mm
45
This nozzle fits onto the 14.00mm diameter lens housing of certain M50 Atomstack laser modules.
X7 Pro 16mm
45
This nozzle fits onto the 16.00mm diameter smooth lens housing of certain X7 Pro Atomstack laser modules.
X7 Pro 15mm
45
This nozzle fits onto the 14.88mm diameter threaded lens housing of certain X7 Pro Atomstack laser modules.
Sculpfun
We make nozzles to fit the various styles of Sculpfun laser modules.
S9
55
This nozzle comes with acrylic adapter plates to fit within the recessed lens area of the S9 modules. Some S9 modules have a much deeper recession with a cone, this kit includes the thick spacer for those. There is a 32mm and 28mm diameter plate. The 28mm adapter plate allows you to still retain the use of the laser shield, if you are willing and capable to drill a hole for the air inlet.
S6 Pro 18mm
45
This nozzle fits onto the 18.00mm diameter lens housing of certain S6 Pro laser modules.
S6 Pro 12mm
45
This nozzle fits onto the 12.00mm diameter lens housing of certain S6 Pro laser modules.
XTool D1
We have two versions for the XTool D1 module. You will need to personally measure your module in order to know what size lens housing you have.
XTool D1 16mm
45
This nozzle is 35mm long and fits onto the 16.00mm diameter lens housing.
XTool D1 14mm
45
This nozzle is 35mm long and fits onto the 14.00mm diameter lens housing.
JTech
We have developed a special air assist nozzle for the well-regarded JTech 7W laser modules.
JTech 7W Pro
50
This nozzle is 38mm long, which should place the tip level with the shroud around the lens area. It comes with an adapter ring that has M9x0.5mm threads inside. You simply have to remove the silver knurled thumb ring off the end of your lens barrel, then thread on the adapter ring until it bottoms out, then the nozzle slips over the ring and is held on with a set screw.
Add a footnote if this applies to your business
Our Partners
